Detailed network client installation for Mac

This section explains how to install DNASTAR Lasergene as a network client working in tandem with a DNASTAR license server. Administrator privileges are required to perform this installation.

To perform network client installation on Mac:

1. Log in to your DNASTAR account and go to the My Account page. Press Lasergene for Mac OS X to download the network client installer.
   
   

2. Close all Lasergene applications from a previous installation.

3. Double-click on the disk image (.dmg) to open a window containing the installer app (.app).

4. Move the standalone/client installer file (.app) into the LasergeneClient’x’ folder that was created during License Server installation. This folder contains the files LG‘x’.lshost, NG‘x’.lshost, AS‘x’.lshost. Then copy the entire folder to the client machine. If you are using MacOS 10.14 or earlier, the folder can be placed anywhere, such as the client desktop. If you are using MacOS 10.15 and later the LasergeneClient’x’ directory should be placed at the top level of the user directory or the shared user directory, i.e. /Users/USERNAME/LasergeneClient or /Users/Shared/LasergeneClient.

!WARNING: If you are using Mac OS 10.15 or later and instead run the installer from ~/Desktop, ~/Documents, or ~/Downloads, the .lshost or .keyhost files will not be properly copied to the Licenses directory.

5. Double-click on the installer app to launch the installer.

6. Follow the instructions in the DNASTAR Lasergene Installer screen, and then click Next.

7. In the License Agreement dialog, read the agreement. If you agree to the terms (required for installation), select I accept the agreement and then press Next.

8. In the Installation Directory screen, click Next to install in the default location (recommended). Otherwise, click on the folder icon to select a non-default location.
   
   

9. In the Ready to Install screen, click Next. You will see a progress bar showing the progress of the installation.

*Note: If you cancel an installation in progress, you will be asked to confirm the cancellation. If you respond Yes, a second popup will ask if you would like to file a technical support request to get help with the installation. Clicking Yes in this dialog will take you to the DNASTAR website’s Technical Support Request page.

10. If a license for the current version of Lasergene is not detected, the Lasergene Authorization dialog will open.
    
    
    
    If the correct *.lshost files are in the same directory as the installer app, you will not be prompted to license the software. Otherwise, select Network and enter the License Server’s Hostname or IP address in the text box. The IP Address can be found in the LasergeneClient’x’ folder created on the host computer’s desktop during License Server installation. Click the Authorize button.
    
    If you used a recognized key, you will receive a message containing an OK button Press OK to continue the installation.

*Note:*If you receive an *Unable to authorize message when installing a network client, see Troubleshoot license server authorization.

11. When installation is complete, press Finish. The DNASTAR Navigator will launch automatically.

The installed Lasergene applications can now be accessed via the DNASTAR Navigator or the /Applications/DNASTAR folder.